143 lines
3.7 KiB
C
Executable File
143 lines
3.7 KiB
C
Executable File
#include "isr.h"
|
|
#include "idt.h"
|
|
#include "../drivers/screen.h"
|
|
#include "../kernel/util.h"
|
|
#include "../drivers/ports.h"
|
|
|
|
isr_t interrupt_handlers[256];
|
|
|
|
/* Can't do this with a loop because we need the address
|
|
* of the function names */
|
|
void isr_install() {
|
|
set_idt_gate(0, (u32)isr0);
|
|
set_idt_gate(1, (u32)isr1);
|
|
set_idt_gate(2, (u32)isr2);
|
|
set_idt_gate(3, (u32)isr3);
|
|
set_idt_gate(4, (u32)isr4);
|
|
set_idt_gate(5, (u32)isr5);
|
|
set_idt_gate(6, (u32)isr6);
|
|
set_idt_gate(7, (u32)isr7);
|
|
set_idt_gate(8, (u32)isr8);
|
|
set_idt_gate(9, (u32)isr9);
|
|
set_idt_gate(10, (u32)isr10);
|
|
set_idt_gate(11, (u32)isr11);
|
|
set_idt_gate(12, (u32)isr12);
|
|
set_idt_gate(13, (u32)isr13);
|
|
set_idt_gate(14, (u32)isr14);
|
|
set_idt_gate(15, (u32)isr15);
|
|
set_idt_gate(16, (u32)isr16);
|
|
set_idt_gate(17, (u32)isr17);
|
|
set_idt_gate(18, (u32)isr18);
|
|
set_idt_gate(19, (u32)isr19);
|
|
set_idt_gate(20, (u32)isr20);
|
|
set_idt_gate(21, (u32)isr21);
|
|
set_idt_gate(22, (u32)isr22);
|
|
set_idt_gate(23, (u32)isr23);
|
|
set_idt_gate(24, (u32)isr24);
|
|
set_idt_gate(25, (u32)isr25);
|
|
set_idt_gate(26, (u32)isr26);
|
|
set_idt_gate(27, (u32)isr27);
|
|
set_idt_gate(28, (u32)isr28);
|
|
set_idt_gate(29, (u32)isr29);
|
|
set_idt_gate(30, (u32)isr30);
|
|
set_idt_gate(31, (u32)isr31);
|
|
|
|
// Remap the PIC
|
|
port_byte_out(0x20, 0x11);
|
|
port_byte_out(0xA0, 0x11);
|
|
port_byte_out(0x21, 0x20);
|
|
port_byte_out(0xA1, 0x28);
|
|
port_byte_out(0x21, 0x04);
|
|
port_byte_out(0xA1, 0x02);
|
|
port_byte_out(0x21, 0x01);
|
|
port_byte_out(0xA1, 0x01);
|
|
port_byte_out(0x21, 0x0);
|
|
port_byte_out(0xA1, 0x0);
|
|
|
|
// Install the IRQs
|
|
set_idt_gate(32, (u32)irq0);
|
|
set_idt_gate(33, (u32)irq1);
|
|
set_idt_gate(34, (u32)irq2);
|
|
set_idt_gate(35, (u32)irq3);
|
|
set_idt_gate(36, (u32)irq4);
|
|
set_idt_gate(37, (u32)irq5);
|
|
set_idt_gate(38, (u32)irq6);
|
|
set_idt_gate(39, (u32)irq7);
|
|
set_idt_gate(40, (u32)irq8);
|
|
set_idt_gate(41, (u32)irq9);
|
|
set_idt_gate(42, (u32)irq10);
|
|
set_idt_gate(43, (u32)irq11);
|
|
set_idt_gate(44, (u32)irq12);
|
|
set_idt_gate(45, (u32)irq13);
|
|
set_idt_gate(46, (u32)irq14);
|
|
set_idt_gate(47, (u32)irq15);
|
|
|
|
set_idt(); // Load with ASM
|
|
}
|
|
|
|
/* To print the message which defines every exception */
|
|
char *exception_messages[] = {
|
|
"Division By Zero",
|
|
"Debug",
|
|
"Non Maskable Interrupt | C",
|
|
"Breakpoint | S",
|
|
"Into Detected Overflow",
|
|
"Out of Bounds",
|
|
"Invalid Opcode",
|
|
"No Coprocessor",
|
|
|
|
"Double Fault",
|
|
"Coprocessor Segment Overrun",
|
|
"Bad TSS",
|
|
"Segment Not Present",
|
|
"Stack Fault",
|
|
"General Protection Fault",
|
|
"Page Fault",
|
|
"Unknown Interrupt",
|
|
|
|
"Coprocessor Fault",
|
|
"Alignment Check",
|
|
"Machine Check",
|
|
"Reserved",
|
|
"Reserved",
|
|
"Reserved",
|
|
"Reserved",
|
|
"Reserved",
|
|
|
|
"Reserved",
|
|
"Reserved",
|
|
"Reserved",
|
|
"Reserved",
|
|
"Reserved",
|
|
"Reserved",
|
|
"Reserved",
|
|
"Reserved"
|
|
};
|
|
|
|
void isr_handler(registers_t r) {
|
|
kprint("received interrupt: ");
|
|
char s[3];
|
|
int_to_ascii(r.int_no, s);
|
|
kprint(s);
|
|
kprint("\n");
|
|
kprint(exception_messages[r.int_no]);
|
|
kprint("\n");
|
|
}
|
|
|
|
void register_interrupt_handler(u8 n, isr_t handler) {
|
|
interrupt_handlers[n] = handler;
|
|
}
|
|
|
|
void irq_handler(registers_t r) {
|
|
/* After every interrupt we need to send an EOI to the PICs
|
|
* or they will not send another interrupt again */
|
|
if (r.int_no >= 40) port_byte_out(0xA0, 0x20); /* slave */
|
|
port_byte_out(0x20, 0x20); /* master */
|
|
|
|
/* Handle the interrupt in a more modular way */
|
|
if (interrupt_handlers[r.int_no] != 0) {
|
|
isr_t handler = interrupt_handlers[r.int_no];
|
|
handler(r);
|
|
}
|
|
}
|